![]() |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() |
#1 |
Premium Member
![]() Join Date: Feb 2007
Location: Elk Grove
Posts: 939
|
Air Water and Ice 5 Stage Help
I just changed out all of the filters and RO membrane on my RO system. Now all of the water is coming out of the drain side of the system. Only a drip is coming out of the DI side. I opened up the RO membrane canister to make sure it is seated properly and it appeared to be. I need help figuring out what's going on. I can elaborate more if this doesn't say all of the facts of what's going on.
__________________
Sweetie this is the last thing i need for my tank i swear! David For my Oceanic 156 Build thread click the little red house Current Tank Info: Oceanic Ultimate 156, 40 gal sump/fuge, the rest is under construction. |
![]() |
![]() |
#2 |
Premium Member
![]() Join Date: Feb 2007
Location: Elk Grove
Posts: 939
|
I thought the fast flush might be the reason why. But the fast flush valve is closed. The RO Only valve is closed, and the DI By Pass valve is closed. Of the 2 90 degree bends leaving the RO membrane it's only coming out of the drain side of the membrane. I took the bend off of the side to the DI and blew air through it just fine. Help.
__________________
Sweetie this is the last thing i need for my tank i swear! David For my Oceanic 156 Build thread click the little red house Current Tank Info: Oceanic Ultimate 156, 40 gal sump/fuge, the rest is under construction. |
![]() |
![]() |
#3 |
RC Sponsor
![]() Join Date: Dec 2007
Location: Olathe, KS
Posts: 91
|
RODI help
How old is your system? This issue is most typically caused by the black fast flush handle not being in the correct position (as you mentioned).
|
![]() |
Thread Tools | |
|
|